Seagate st3300007lc 300gb cheetah 10k. 7 u320 scsi 10k rpm drives (80-pin scsi connector). Drives based on the amount of run-time they have on them. These are spare drives which were kept on-hand several years for emergency purposes and were never used. Drive model number is st3300007lc cheetah 10k.
Normal retail new for the 4-piece lot: $1000+. The actual amount of run-time on these drives can be verified using the seagate seatools diagnostic. Rives have been sitting idle and unused in a cabinet (safely packaged in a static bag) for 3 years.
The drives were kept on-hand for emergency purposes, however are no longer needed. Naturally, the drives are in perfect new operating condition. The drives were also tested for quality / condition of the drive sectors and media surface. Naturally, as expected, all test results showed these drives to be in perfect 100% healthy new operating condition.
However, there are very noticeable scratches / scuffs on the aluminum drive cases. It is not unusual for new seagate scsi drives of this generation to show this issue.
This is typical because the case material seagate used was not scuff or scratch free. (the soft and shiny aluminum case has a tendency to scratch / scuff easily).
Please see close-up pictures which provide a better general visual picture of the issue. Drives are running rev 0005 seagate firmware. To locate seagate’s specifications and technical info for this model drive go to.
No adapters, cables, manuals, mounting hardware etc supplied! We do not supply tech support for installation, operation or compatibility issues for this component.
Check out our feedback to put your mind to rest.
Tags : 10k 7, 300gb, scsi, seagate, st3300007lc, u320
