5 sas 6gb/s (serial-attached-scsi) 10k rpm drives / 2.5-inch small form factor (sff) drives. However, they require a 3.5-inch drive bay because they are mounted in the required heatsinks which turns them into a 3.5-inch form factor drive. Branded oem version of the seagate model st9600205ss. The actual amount of run-time on these drives can be verified using the seagate seatools diagnostic.
These drives are mounted in excellent heatsinks which fit a standard 3.5-inch drive location. These disks can get extremely hot and require the proper heatsink and ventilation. These are sas drives (not parallel-scsi, sata or ide). If you do not know what a sas (serial-attached-scsi) drive is then you do not want these :- this model drive requires a sas controller for operation. These drives were immediate new pulls from new systems converted to a different storage configuration.
Rives have been sitting idle and unused in a cabinet (safely packaged) for approximately 3 months. After being pulled from the original system the drives were kept on-hand in case they were needed elsewhere, not needed ….. Drive model number is st9600205ss savvio 10k. As expected, the drives are in 100% perfect new operating condition.
The drives were tested for quality / condition of the drive sectors and media surface. Naturally, as expected, all test results showed the drives to be in perfect 100% healthy new operating condition. Technical info and specifications for this model drive are available at the following seagate web link.
No software, manuals, mounting hardware, adapters or cables etc supplied! We do not supply tech support for installation, operation or compatibility issues for this component. Check out our feedback to put your mind to rest.
Tags : 10k 5, 6 gb s, 600gb, savvio, seagate, st9600205ss
Categories : Uncategorized
Sorry! This article is unable to leave response!